Those were the options to replace my nonfunctioning regulator. My brother went to Autozone and was told you can tell because they have 6 wires coming out but both models do and there are no markings on mine. Is there a way to tell from the generator? The book shows the wire terminal orientation as being identical for 40 and 55. I'm curious how they work if anyone knows. THere seems to be some resistence wire that I'm guessing would vary with difference in current. Rosco
40 or 55 amp regulator for 80 Pickup
Jul 29, 2007
2 Replies
The two voltage regulators listed do not have the same connectors. Take a look...
formatting link
it works information for your alternator/charging system is there as well. Dan
messagenews: snipped-for-privacy@o61g2000hsh.googlegroups.com...
I had been looking only at the drawing in my book but from the picture on the autozone site its clear I need the 55 amp. Thanks Rosco
Join the Discussion
Have something to add? Share your thoughts — no account required.
Didn't find your answer?
Ask the community — no account required