The alternator is new. The cold start valve is working. Battery is charged. Plugs are new. Any advice?
87 Toyota won't start without starting fluid.
Jan 07, 2006
8 Replies
This is still Chris posting: The timeing is set right!
It is started but won't go in gear now.
Could it be the catalitic converter???
Could it be the catalitic converter???
Chris,
Tell us a little more about the cars history and what you've done so far. Starting problem could be the fuel pump. The other might be a different story. Please tell us more info.
Jthere is a cold start injector time swich that tells your cold start injector to open and add additional fuel when its cold, then as the engine warms, tells the injector to shut off. it is located on the water neck on the drivers side the head.
New motor, cranks and idles, when you put it in gear it dies, unpluged throdle censor and put it in gear will still idle but will not go but as soon as you touch the gas it dies, new distributor, new cap, new rottery button, new plugs and wires, cold start valve is good, cold start sensor is broke, acts like it's not getting enough gas when engaged.
New motor, cranks and idles, when you put it in gear it dies, unpluged throdle censor and put it in gear will still idle but will not go but as soon as you touch the gas it dies, new distributor, new cap, new rottery button, new plugs and wires, cold start valve is good, cold start sensor is broke, acts like it's not getting enough gas when engaged.
Join the Discussion
Have something to add? Share your thoughts — no account required.
Didn't find your answer?
Ask the community — no account required