Re: EGR Valve 2000 Camry

Mar 18, 2005 1 Replies

I AM ALSO HAVING THE SAME PROBLEM WITH MY 2000 CAMRY, BUT I HAVE BEEN GIVEN



2 DIAGNOSIS FROM THE SAME COMPUTER READING, THE DEALERSHIP TOLD ME I NEEDED A NEW VSV, AND ANOTHER MECHANIC SAID I NEEDED A EGR VALVE. ARE THEY THE SAME THING? I KNOW NOTHING ABOUT CARS, BUT I FOUND SOMEONE WHO WILL REPLACE IT FOR FREE IS I BRING HIM THE PART, AND I CANNOT FIND A VSV ANY WHERE, IF ANYONE WOULD TELL ME WHAT I NEED TO BUY OT THE PART NUMBERS I WOULD BE MOST GRATEFUL. THEY SAID IF THAT DOES NOT WORK I NEED A CATALYTIC CONVERTER. AND I NEED TO DO THIS THE CHEAPED WAY POSSIBLE CAUSE I AM BROKE


THANKS ANNIE



"anniescherer" wrote: > I AM ALSO HAVING THE SAME PROBLEM WITH MY 2000 CAMRY, BUT I > HAVE BEEN GIVEN > 2 DIAGNOSIS FROM THE SAME COMPUTER READING, THE DEALERSHIP > TOLD ME I NEEDED > A NEW VSV, AND ANOTHER MECHANIC SAID I NEEDED A EGR VALVE. ARE > THEY THE > SAME THING? I KNOW NOTHING ABOUT CARS, BUT I FOUND SOMEONE WHO > WILL > REPLACE IT FOR FREE IS I BRING HIM THE PART, AND I CANNOT FIND > A VSV ANY > WHERE, IF ANYONE WOULD TELL ME WHAT I NEED TO BUY OT THE PART > NUMBERS I > WOULD BE MOST GRATEFUL. > THEY SAID IF THAT DOES NOT WORK I NEED A CATALYTIC CONVERTER. > AND I NEED > TO DO THIS THE CHEAPED WAY POSSIBLE CAUSE I AM BROKE > > > THANKS > ANNIE

Annie:

The VSV /may/ be located on the rear of the engine, directly below the egr valve, but reachable only from underneath the car. Even then, it?s VERY difficult to access and remove, though it would be easier if the car was on a lift. The VSV is on the end of a small bracket, which is attached to the engine with one 10 or 12 mm bolt. It will have two vacuum hoses and an electrical plug attached to it. Most of the Camry manuals show it as being on the front of the engine, which wasn?t the case for my 1997. Be very careful in removing the plug...if you break the wires and can?t splice them, the plug itself is apparently not available except as part of a $300 wire harness, according to three dealers I tried.

The VSV was about $55 from a discount Toyota parts dealer.

We ended up making a new plug with two press-on terminals, and moved the VSV to the top of the engine compartment.

Good luck!

Jeff

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required