never buy anything form walmart beastbuy circuscity or crotchfeel
I just recently did an install in my 86 P/U. It still had the original
> cover plate, where the radio should be. If the stock radio is still in you
> should be able to use the factory mounting brackets. You will need a
> harness adapter for a pre-87 Toyota connector. I think the Metra part
> number is 70-1761. Walmart is the cheapest place to buy these about $7.
> Just butt connect the matching wires from the harness adapter to the Pioneer
> harness. You could go to Circuit City and get the express connection set,
> Toyota side 80-1761 and Pioneer side, for about $35. Metra mounting kit for
> about $16 at CC.
>
> If you need the part number for the factory brackets, it's Toyota P/N
> 08607-35010 for about $18.82.
>
> If you have any questions, post them to this NG.
>
> Good Luck!
>
> JW
>
> > I'm thinking about installing a DIN size Pioneer CD/MP3 Receiver deck in
> > my '85 SR5 Extra Cab. Anybody got any helpful hints or tips? This is the
> > first time I've installed a DIN type radio in any vehicle.
> > Are there any tips or tricks that I should be aware of while removing the
> > current receiver and amplifier/Equalizer stack?
> > Any help will be appreciated.
> > Thanks.
> > Jerry
> >
>
>