1. Home
  2. Chrysler Cars
  3. Running rough ’96 sebring

Running rough ’96 sebring

?96 sebring 120K miles

It runs fine after it has been sitting for a while (overnight) but after it has been running and engine temp is normal it gets really rough at idle and especially noticeable at lower RPM ~1500. There is no stalling, check engine light did come on.

Reply to
cschema
Loading thread data ...

Then pull the codes and post them, please, that is what the check engine light is for.

Ted

Reply to
Ted Mittelstaedt

formatting link
Visit Topic URL to contact author (reg. req'd). Report abuse:
formatting link

Reply to
tim bur

formatting link
Visit Topic URL to contact author (reg. req'd). Report abuse:
formatting link
don't state what engine this vehicle has, but if it is the 2.5 6cyl trythis. If the tube that runs from the EGR valve to the side of the intake manifold is hot at idle, unplug the EGR valve vacuum hose and see if the idle smoothes out. It is very possible that the valve is causing your rough idle

Glenn Beasley Chrysler Tech

Reply to
maxpower

Sorry, P0202, P0302

2.5L V6 Sebring Coupe LX Replaceing plugs and cables ATM.
Reply to
cschema

formatting link
Visit Topic URL to contact author (reg. req'd). Report abuse:
formatting link

Reply to
tim bur

MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.