1. Home
  2. Peugeot cars
  3. Peugeot Diagnosis

Peugeot Diagnosis

Hello again!

I am thinking of downloading some diagnosis tools for my 206, (freediag). Do Peugeot use their own specific codes in addition to the EOBD II standard, or do they just use EOBD II?

Thanks

David

Reply to
SnoopGroggyGrog
Loading thread data ...

Afaik they use the standard EODBII DTC codes, alongside with pug specific codes

Reply to
Marc Amsterdam

They use EOBD II std codes for RPM and DTC, but all other sensors data are under a proprietary procol.

I read DTCs with a ELM scan bought on EBay (34 euro) and OpenDiag.

Cia' Max

Reply to
rocciamax.ng

Ok.

What hardware do I need? The ELM scan that you bought off Ebay, is there a particular name I should be looking for on Ebay?

Thanks again!

David

snipped-for-privacy@email.it wrote:

Reply to
SnoopGroggyGrog

I bought this one

formatting link
have also a USB version. and I use it with my notebook, with a serial-USB 1.1 adapter.

Be aware that the only data you can see from a Peugeot OBD are engine rpms and DTCs... everything else (MAF, calculated load, FTs etc) is encoded and you need a peugeot scanner to see 'em :(

Of course, you can also turn off that darn MIL :D

cia' Max

Reply to
'Roccia' Max De Poli

MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.