I have a 4 cylinder, 5 speed. Can't shift when car is running. When engine is off, shifts fine. I checked the transmission fluid, it's fine. The clutch fluid was low, about down to a 1/4 inch. I added more fluid. Still won't shift. Also, when the engine is running, and I push in the clutch, I hear a clicking sound I didn't have before. It goes away when I release the clutch. HELP!!!
Try bleeding the clutch fluid. I had a similar problem years ago, bled the system and all was fine afterwards. I'm not sure how the air got in the system and why it didn't happen again but I'm not complaining. :)
alex
debidoes044 wrote:
Any one know how to bleed the clutch?
pump clutch pedal,hold pedal down while your helper cracks open the bleeder screw on the slave cylinder.Make sure that you dont let the resivoir run out of fluid though.
JIM
MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.