Chevrolet 4x4 Trucks

diesel power programmers

do you have one ? what is it on ? what do you like abought it ? any dislikes ?

0 comments posted 19yrs

posted by chadhobbie

0 comments posted 19yrs posted by chadhobbie

Thinking of buying

I was hoping to get some input from all of you on a potential GMC purchase. I'm looking at a 2004 Sonoma, V-6, 4x4, cre...

0 comments posted 19yrs

posted by blackyourhair1988

0 comments posted 19yrs posted by blackyourhair1988

GMC Sierra torsion bars

I've got a 2000 GMC sierra 1/2 ton with a 6" lift on it. I am noticing some knocking noises when making slow tight turn...

4 comments posted 19yrs

posted by drewhageman

4 comments posted 19yrs posted by drewhageman

Tricks for changing these sensors?? ECT and oil press sender W series 4.3

It would seem that there must be a trick or an easy way to replace both the engine coolant temp sensor and the oil pres...

4 comments posted 19yrs

posted by anixon1

4 comments posted 19yrs posted by anixon1

CFMI?? fuel pressure 'holding' question

I tested the fuel pressure at the rail/schrader test port on my 95 Jimmy (W series 4.3) and it was at 60psi with the ke...

1 comments posted 19yrs

posted by anixon1

1 comments posted 19yrs posted by anixon1

1999 Tahoe EGR Value

Can anybody tell me what an EGR Value does when it gets stopped up??? My service engine light comes on when it is under...

0 comments posted 19yrs

posted by u30943

0 comments posted 19yrs posted by u30943

350 engine .080 overbore

Hi all! I bought an engine last week at a race auction. It is a shortblock 350 chevy, with flattop .080 sealed power pi...

11 comments posted 19yrs

posted by e01e

11 comments posted 19yrs posted by e01e

4x4 engage problem

Can't get the front to lock in to 4wd ... the transfer case goes through all the gears but front wheels don't do squat....

12 comments posted 19yrs

posted by lblower

12 comments posted 19yrs posted by lblower

2006 Chevy 5.3 Cooling System

Hey Guys, I have a question about a noise that I here coming from my 2006 Chevy Silverado 5.3 liter. When sitting at a...

5 comments posted 19yrs

posted by nomail

5 comments posted 19yrs posted by nomail

95 4.3 vortec (Jimmy) ignition switch question on fuel delivery

Sorry if this is a stupid question but if there's a bad ignition switch in my Jimmy, is it possible that the engine wil...

13 comments posted 19yrs

posted by anixon1

13 comments posted 19yrs posted by anixon1

is there any parts in a TBI distributor that can go ?

350 tbi distributor. I replaced the ESC module but am getting advice it could be the magnets ???? I changed my fule fil...

0 comments posted 19yrs

posted by lblower

0 comments posted 19yrs posted by lblower

Trying to track down leak in '97 Blazer LS

Hello, It figures that something like this would wait for the cold weather to arrive. I just noticed a leak on the driv...

15 comments posted 19yrs

posted by pbogi

15 comments posted 19yrs posted by pbogi

rough idling in cold weather 2001gmc sierra 1500

hi i have a 2001 gmc 1500 sierra 4 wheel drive in cold weather when i start the truck in the morning the engine races v...

5 comments posted 19yrs

posted by kevbanfield

5 comments posted 19yrs posted by kevbanfield

350 tbi rolls over to much before starting

as above. 1990 tbi 350 it rolls over 8-12 times before starting and is a bitch in the cold... it will flood before it w...

10 comments posted 19yrs

posted by lblower

10 comments posted 19yrs posted by lblower

'96 K-3500 Instrument Cluster

Hello all, My trip odometer quit turning while I drive. If I reset it, it might go as high as 0.9 miles and then stops...

0 comments posted 19yrs

posted by CTBarbarinNOSPAM

0 comments posted 19yrs posted by CTBarbarinNOSPAM