Re: 1992 Audi 100 Audio Questions

Hi there,

Two things to get power supply ignition and ground you need a test lamp, this is easy to purchase in any hardware store.

When you´ve done that and to develop into speakers system just take a 1,5 battery and try wire by wire. One wire in + and try the rest of them on - you´ll see that whwn you match the couple loud-speaker will sound bump like. It won´t break i assure you I professionally work in it..

Regards.

"TonyJ" escribió en el mensaje news:3f60b1b1$0$173$ snipped-for-privacy@newsreader.visi.com...

If this is like the Bose systems in the type 44s it will not be that > easy because the speakers have their own amps and the wiring is too > small to handle the signal to non-amped speakers. > > You may want to check the threads at AudiWorld.com and ask a few others. > > If you call the dealer with the VIN and the serial number on the side of > the radio they can look up the security code. > > Tony > '91 100Q 5spd > > Vladimir Pasitchnyk wrote: > > Hello all, > > I recently purchased a 1992 Audi 100. I really like the car, but I need to > > put in a simple new audio system, because the stock non-bose gamma unit is > > not even turning on and i dont have the code. I have 2 questions. > > > > 1. Is there some easy wiring diagram on the web maybe to help with > > connecting the new headunit? (the previous owners totally screwed up the > > wiring in the back of the stock receiver) > > > > 2. Is it difficult to install larger speakers (6x9 ?) in the back than the > > stock 5"? how about the front (larger than 4" ?) > > > > >
Reply to
Xavi Cañete
Loading thread data ...

MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.