Chevrolet Trucks

Help! 2000 Sonoma Door Hinge Pin

I tried replacing the hinge pins and bushings on the door. It went pretty well except I don't know how to get the sprin...

2 comments posted 19yrs

posted by jenkins283

2 comments posted 19yrs posted by jenkins283

4wd pushing straight through turn

I have a 2003 Silverado with 6.0. When in 4wd, rather than the front end pulling the truck around the turn, it pushes s...

6 comments posted 19yrs

posted by none

6 comments posted 19yrs posted by none

96 4.3 Radiator

I'm leaking coolent from behind the tin nut on the trans cooler line. I tried to snug it up some but it didn't help. Do...

1 comments posted 19yrs

posted by iowahawks

1 comments posted 19yrs posted by iowahawks

steering shaft 03 silverado

I have a 03 Silverado and took it in for a noise in the trans I thought and they had a couple of service bulletins. The...

1 comments posted 19yrs

posted by yeoman

1 comments posted 19yrs posted by yeoman

1998 K1500 4X4 Suburban

I have a jerking problem going down the road at any speed. Before that it was missing, I had the wire, plugs, dist cap,...

4 comments posted 19yrs

posted by none

4 comments posted 19yrs posted by none

Cat Shot...or Not?

My '99 2.2L Sonoma -- 96K miles -- has developed a rattling in the exhaust. I put it up on stands and listened to it an...

1 comments posted 19yrs

posted by nhollywoodcat

1 comments posted 19yrs posted by nhollywoodcat

Headlights

I want to change out the headlights on my 01 Silverado to a brighter one Next to My wife's Lexus with hd lights I have...

1 comments posted 19yrs

posted by hdyman58

1 comments posted 19yrs posted by hdyman58

Head lights

I want to change out the whimpy (Compared to my wife's Lexus HD )headlight in my 01 Silverado Any suggestion to the brig...

0 comments posted 19yrs

posted by hdyman58

0 comments posted 19yrs posted by hdyman58

6.2 transplant questions

Hi, I am intersted in putting a 6.2 diesel in a 75 El Camino alomg with a 700R4. I have the engine and trans and am goi...

3 comments posted 19yrs

posted by LP1330

3 comments posted 19yrs posted by LP1330

Rusting 2001 2500hd

I have an extended cab and the rear doors have bad rust on the inside bottom seam.Anybody experencing the same problem?...

1 comments posted 19yrs

posted by rnslaud

1 comments posted 19yrs posted by rnslaud

1990 4X4 ignition lock, key problem

I don't know how, but I have managed to loose the keys to my ignition on my 1990 Chevy 1 ton 4X4. I have a spare door k...

7 comments posted 19yrs

posted by danhargrave

7 comments posted 19yrs posted by danhargrave

1989 chevrolet k1500 emergency brake problem

Hi Everyone I put my e-brake on recently and it snapped. Upon further investigation, i noticed that the spring onthe fr...

2 comments posted 19yrs

posted by Illsley1983

2 comments posted 19yrs posted by Illsley1983

Motor Mounts on '86 Truck/Sub/Blazer

Do the V8 mounts line up with a straight six or is it a different mount altogether? If they needed to be changed, would...

33 comments posted 19yrs

posted by jonrpick

33 comments posted 19yrs posted by jonrpick

s-10 needs new bed

I have a '97 S-10 that needs a new bed. What year ranges can I look for that will fit OK?

0 comments posted 19yrs

posted by rbig

0 comments posted 19yrs posted by rbig

neutral safety switch schematics needed

I am having problems with the wiring to the neutral safety switch on a 97 chevy pickup. This is a vortec 5.7 L engine w...

0 comments posted 19yrs

posted by bomberopm

0 comments posted 19yrs posted by bomberopm