I finally have gotten the blower motor out of my 90 caravan (5 screws as well as loosening the metal support for the heater system). I determined that the fan was bad by measuring the resistance across the leads - it was open circuit. Also, there was battery voltage at the connector.
However, I can't figure out how to get the fan/turbine off the old motor. It has a hose clamp around the shaft that I took off, but I can't budge the fan. There are two slots that looked like a screw driver could be used to separate them. Does the blower motor replacement usually come with the fan installed or should I be able to swap the fan from the old motor?
Thanks for your help.
Mike