New O2 sensor, MAP 2.4V to .9V for 5 to 20 PSI,All Vacuum good, timing 12 deg @ idle, advances with RPM, see a glitch on coil waveform due to cylinder
1 rotor slot, EGR effects idle, but have not removed to examine yet. New plugs and wires. Only 65,000 mi..
No power until about 3000 RPM at which point getting about 5 PSI boost (max
7). Then it develops good power. Fuel pressure is over 50 PSI. I'm about out of ideas. Any suggestions?
Thanks for your help.
Bob M