This has no doubt been posted before, as I cannot see any rad drain (can hardly see the rad!) I'm thinking pull the hose off. Can only just get at the engine connection and will make for difficult flushing. Do you have to pull the rad support at the top and the colling fans out to get at the bottom rad hose connection? Many thanks. Steve G
98 Stratus how drain rad
Sep 08, 2006
1 Replies
You are correct. I posted this same question a week or so ago. If you have the 2.4L engine, the drain is on the left side. The valve turns about 90 degree to the left. At this point, gently pull it back. It is hard to do this only by feel.
The last time that I did mine, I disconnected the bottom hose from the engine.
If you have the 2.5 V6, the drain is on the right side.
-KM
Join the Discussion
Have something to add? Share your thoughts — no account required.
Didn't find your answer?
Ask the community — no account required