Hi, folks, , , , , , ,
The headlights on my 1995 Voyager have frosted over. I know thats a common problem with cars from the 80's and 90's. Is there any way this can be fixed short of spending a fortune for new headlights?
Thanx
Ron C. =================================
You can try to polish them with a good grade of car polish (I've had good results with blue-label TR3-brand car polish). Others have had results with toothpaste. If they're badly enough deteriorated, you will need new headlamp assemblies.
Sometimes wet-sanding with 600, then 1200 grit, THEN polishing with rubbing compound or rouge (polishing compound for Plexi) does the job
- at least short term The big problem is the polymer they use for the lens does not stand up well to ultraviolet and ozone. Once polished you need to protect the lens. Some say armour-all works. Or Son-Of-A Gun, others swear by automotive polish, and I know some use "future" Acrylic floor polish.
Eventually, the job needs to be done again
Thank you folks, , ,
I will try the rubbing compound trick, , ,, I never thought of that.
Thanx
R>>
Follow the link new ones for $30.00 I have used them for my wife's 94 shadow.
Well I might agree except the originals probably came from Taiwan or some such place as well.
Nope, the originals came from Wagner in the USA. They weren't *great*, to be sure, but...!
With all due respect, Dan'l, can anything be much worse than the crap OEM headlamps in question??? The "Taiwanese copycats" may VERY WELL be BETTER than original (I've seen it quite often in other products)
They're not cheap! The LHS is $150 a side...
$30 for the OP's 95 Voyager, but he may also have to spring for the housings at $47 ea.
Joe wrote:
Have something to add? Share your thoughts — no account required.
Ask the community — no account required