> >
> > Hi
> > I need to fix front left window in my 98 Intrepid. Windows glass went
> > somehow loose.
> > To do it I need go inside the door panel. I believe there could be some
> > obstacles to open it.
> > Anyone has done it? Please for some tips
> > Thanks
> > jazu
>
> Not terribly hard door panel to remove, all phillips screws,
> some obvious, some hidden under the lower speaker grill.
>
> What you'll likely find when you get it apart is that one of
> the clips glued to the bottom of the door glass has broken.
> If you can get the glue bond loose, and get the clip off the
> glass, it can be welded, then re-glued with either 3M Window
> Sash adhesive or 3M Structural Adhesive.
>
> I have yet to find a source for replacement clips, so if the
> above doesn't work or is not feasable, you're looking at
> replacing the entire window glass for $200+.
Your Chrysler dealer can order the clips - see my other post for the P/N and complete info. on *everything* needed (and yes - replacing the entire glass is the more expensive but easier way).
Bill Putney (to reply by e-mail, replace the last letter of the alphabet in my address with "x")