I have a 91 Plymouth Acclaim with the 2.5 non-turbo and auto trans with
> about 120K on the original trans.
>
> In the process of pulling the steering knuckle to replace the right strut, I
> found that pulling on the axle caused the trans to leak, but it stops when I
> push the axle back in. Also, the axle doesn't feel as though it is secured
> to the trans.
>
> The area around the leak shows no signs of leakage prior to this. >
> I have no experience with auto trans, and I never did more than replace a
> clutch on a manual. Can anyone offer advise?
>
> Thanks,
>
> D
>
>