Can anyone tell me if it is possible to replace the solenoid pack on a '97 Voyager (3.3L V6/41TE) without taking the whole transaxle unit out?
IF so, where is the solenoid pack and how do you get to it?
- posted
20 years ago
Replace solenoid pack on Voyager
Loading thread data ...
- Vote on answer
- posted
20 years ago
Yes u can. In the front of it just follow the huge wire harness down-the connector in the top of the solinoid body is held by a 10mm bolt-take it out and pull up on the connector. There are more 10mm bolts holding the solinoid body on to the trans. You probably have a black insulator cover over the body-remove it. Also once you have the new solinoid on-yer gonna need an inch pound torque wrench for the final torque. Try to borrow a repair manual for this trans or photocopy the pages to walk you through it. Also unless the area of the solinoid body is free of crud-pressure wash the area before removing the body. Once you take it off you will see why being clean is so important. Good luck to you.
Respectfully submitted,
Loren Knighton Woodland, CA.
Under the hood since 1964 Member TRNI IATN
formatting link