I need to put a new belt on my 95 Concorde 3.5. How do I release the idler tension on this engine??? Thanks Smitty
serpentine belt
Oct 11, 2006
2 Replies
Wrench the idler arm to relieve spring tension, replace belt.
wrong!! loosen the 15mm nut and using a 13 socket back off on the screw, install belt and tighten screw and lock down the 15mm nut
Glenn Beasley Chrysler Tech
Join the Discussion
Have something to add? Share your thoughts — no account required.
Didn't find your answer?
Ask the community — no account required