Couple of questions:
How do I seperate the swing out part of the key from the blipper part? How do I teach the car to recognise the new blipper?
Ta,
M.
Xantia key - replacing the blipper
Jun 03, 2004
3 Replies
"Lynyrd Skinhead" schreef in bericht news: snipped-for-privacy@uni-berlin.de...
It has to be pressed out and pressed in to the new blipper.
You can't as far as I know. You need a special code, that is delivered on a card (creditcard size). The computer in the Car has to be re-programmed with a new code and the blipper and all spare keys have to be re-programmed. If you don't repogram the spare keys, than you can't start the car.
The Citroen garage can do this job for you, they can also request a new code from Citroen-France, if you don't have the card or lost it. If you have the card, than try to find a store that sells keys, locks, etc and duplicates keys. Some companies have advanced equipment to re-program and duplicate keys. Usually this will not be a small tools shop at the corner that also duplicates keys.
Good luck!
I /don't/ think that is right from what I have read at
formatting link
I would suggest that the OPdoes a search there as he will probably find this as an FAQ.
bericht
re-programmed
re-programmed.
I don't know about the discussion forum at andyspares, I only know about my own experience with the blipper of my Xsara. But ok, that was a companycar so I just believed the Citroen Dealer, because the company had to pay for it.
Join the Discussion
Have something to add? Share your thoughts — no account required.
Didn't find your answer?
Ask the community — no account required