With engine at normal operating temperature and running:
1) Set BLOWER motor on HIGH
2) Set MODE position to PANEL / Vents
3) Open all OUTLETS that air comes out from.
4) Set Temperatures to COLD Press WASH and REAR WIPER button (at the same
time) for 5 seconds and release... If the module has completed its test
successfully the only ligh that will flash is the REAR wiper LED, Push this
for a moment and those little lights will go back to normal.
Message posted via CarKB.com
Motorsforum.com is a website by car enthusiasts for car enthusiasts. It is not affiliated with any of the car or spare part manufacturers or car dealers discussed here.
All logos and trade names are the property of their respective owners.