96 Explorer cruse control buttons replacement?

Apr 16, 2007 3 Replies

First reply

catphishum

I got my replacements on Ebay. They were used, but uncracked....You have to remove the airbag pad/horn pad to get at the screws that hold these inplace. The installation is pretty easy...You'll need to take proper care not to discharge the airbag though, there should be tips in…

Read the full reply
H
96 Explorer XLT steering wheel mounted cruse control buttons cover with "on" "off" "coast" "resume" etc lettering is cracking and falling apart. This is just the soft plastic cover, the actual pushbuttons and lights underneath are fine.

Is there a replacement part?



Any ideas how to handle this if no (new) part is available?



Thanks, Harry


Vote
Twitter Facebook LinkedIn
H

Thanks for the helpful information ! I'll give Ebay a try.

Harry

catphishum wrote:

Vote
Twitter Facebook LinkedIn
V

You can get the replacements from the dealer...I've done it twice for my

96EB AWD (256K). One important note...MAKE SURE YOU DISCONNECT THE BATTERY BEFORE SCREWING AROUND WITH THE AIRBAG.

Otherwise, they're a snap to replace

Vito

Vote
Twitter Facebook LinkedIn

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required