Re: Ranger Heater Core

Remove the glove box. Under the dash on the Right side, remove the cardboard cover. There are several black plastic screws holding this in
place. Remove the lower half of the black plastic cover ( 4 small screws). with the heater hoses unattached, the heater core will just slip out. There are no clamps or screws holding the core in place, only the support of the black cover.
Add pictures here
<% if( /^image/.test(type) ){ %>
<% } %>
Add image file
Upload is a website by car enthusiasts for car enthusiasts. It is not affiliated with any of the car or spare part manufacturers or car dealers discussed here. All logos and trade names are the property of their respective owners.