Remove the fan shroud, put a socket on the bolt head on the tensioner
pulley, pull toward the passenger side with either a breaker bar or a
ratchet, breaker bar is preferred. Make sure you diagram the belt
routing, or have a good memory, or that the sticker on the rad.
support is intact. Disconnect the battery, and the alt. is 2 mounting
bolts, a nut holding the charge wire and one other connector away from
being free from the truck. Took me about 30-45 mins. to do the job on
Motorsforum.com is a website by car enthusiasts for car enthusiasts. It is not affiliated with any of the car or spare part manufacturers or car dealers discussed here.
All logos and trade names are the property of their respective owners.