Got one rear door power lock that won't lock, with the remote but will open with the remote. It will not lock with the master switch on the driver door. I thnk it may be a weak actuaitor.
Is this a difficult item to remove and install. Or can the the old actuaitor be repaired.
thanks.
Tom
Tom I am not a Honda specialist but I would check the jumper wires between the door and the body, maybe one of them has broken caused by the door being opened and closed over a period of time. Mike
we never use these rear doors ( open and close)so I doubt that there would be a problem in the wireing, its just a pain to have to manually lock that door, or pay Honda $150.00 for a new actuator, but thanks for the reply.
tom
Tom I am not a Honda specialist but I would check the jumper wires between the door and the body, maybe one of them has broken caused by the door being opened and closed over a period of time. Mike
Have something to add? Share your thoughts — no account required.
Ask the community — no account required