I hosed of my engine and then changed the plugs,wires, cap, and rotor. Now the engine turns over but won't start. I'm hoping I only mixed up the wires.
tia jimo
firing order on 94 4cly
Feb 27, 2005
7 Replies
The order is cast written on the intake manifold.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT'sMarv>
By the way the jeep has sat in the driveway about 48 hrs drying
Are you sure there is no water under the distrubutor cap? The smallest amount can be a problem.. I'd remove the cap and dry the inside out, pull of the rotator, dry it out, and then dry as much of the inside of the distributor as you can w/o leaving shreds of rag behind.
HTH
Carl
I think it is 1-3-4-2
You guys are great! I installed the wires 2-1-3-4 instead of the required
1-3-4-2. I had rotated the wires one hole clockwise.thanks again.
jimo
1-5-3-6-2-4
old john
Join the Discussion
Have something to add? Share your thoughts — no account required.
Didn't find your answer?
Ask the community — no account required