1. Home
  2. Jeep and Willys (new and old)
  3. Will Wrangler 16' rims fit my 94 Cherokee hubs?

Will Wrangler 16' rims fit my 94 Cherokee hubs?

Hi All,

94 Cherokee SE, 5spd, 2WD, 125K miles

I'm in need of a set of tires, and found someone (who upgraded) selling new tires with rims from a late model Wrangler that I can pick up on the cheap.

The tires are P225/75/R16's, on a 5 spoke, 5 lug rim.

Will these fit on my 94 cherokee? I have P225/75/R15's on the thing now. I understand the rim on the new tire is an inch taller, don't think this presents a problem, but perhaps you can advise.

I was curious to know if the new wheels will fit my existing hubs.

I'd appreciate any comments. Thanks very much.

S.

Reply to
fraserwag
Loading thread data ...

Thanks for insights, guys. So, the '07 Wrangle rims should fit my '94 Cherokee, correct? The bolt pattern is the same?

Thanks again.

S.

Reply to
fraserwag

I don't know about the new Wranglers, but all the rest of them have switched from your five on four and a half inch hole pattern, to 5 x 5.12" or 5 x 130 centimeter. God Bless America, Bill O|||||||O mailto: snipped-for-privacy@aol.com

formatting link

Reply to
L.W. (Bill) Hughes III

Hi fraserwag, Went out and measured the bolt pattern on our 07 Wrangler. Indeed, the new Wrangler has followed the other new Jeeps and gone to the five bolts on a 130 mm (or 5.12 inch) bolt circle which is different than previous models. Sorry. Les

07 JK

Reply to
LS

Or much else regarding jeeps.

Or cars.

Or life in general.

Reply to
Claude Horribly

The Wrangler was redesigned for '07, and the '07 (JK) rims have a different bolt pattern than the TJ, which shared bolt pattern with your Cherokee. So the answer is no. You OP'd "late model Wrangler" and if it were '06 or prior you would have had zero problems.

Reply to
Matt Macchiarolo

On Mon, 18 Jun 2007 17:01:46 -0700, "L.W. \(Bill\) Hughes III" Amazingly Replied without Prejudice below:

This is from someone who knows you #1.

Reply to
24Bit

MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.