Jeep and Willys (new and old)

92 XJ Steering issue

I was changing the rear oil seals this past weekend. I had the front end on jack stands to drop the front suspension fo...

2 comments posted 19yrs

posted by wfpearson

2 comments posted 19yrs posted by wfpearson

Wiring up Auxiliary Headlights for a Meyer Plow on an 89 YJ

Does anyone know a source for wiring diagram / instructions for hooking up the Meyer auxiliary headlight harness on an '...

3 comments posted 19yrs

posted by bs

3 comments posted 19yrs posted by bs

upgrade 2.5" lift kit for new 35" tires?

I'm looking for advice one the most economical way to increase my 2000 TJ's lift to fit 35" tires. Currently I have 33"...

3 comments posted 19yrs

posted by leehoffman

3 comments posted 19yrs posted by leehoffman

more power from 4.0

Is there a cheep way to get more power out of a 93 Cherokee 4.0? I've been told about TB spacers but is there any other...

22 comments posted 19yrs

posted by abuse

22 comments posted 19yrs posted by abuse

Coutesy Lights in 98 Grand Cherokee

Please help!!!! I have a 98 Grand and the interior lights have been just killin me. First off I'm a licensed electricia...

1 comments posted 19yrs

posted by brig5150

1 comments posted 19yrs posted by brig5150

Checking spring sag

Before I decide on a 2" vs 3" lift for my 95 XJ 4.0L Auto 4x4, I want to measure the current ride height and compare it...

6 comments posted 19yrs

posted by top.secret

6 comments posted 19yrs posted by top.secret

1993 Jeep Cherokee stalls

1993 Cherokee 4.0 manual shift stalls when I am driving it. I generally starts right up in the morning and then when I...

3 comments posted 19yrs

posted by banebeardontwalk

3 comments posted 19yrs posted by banebeardontwalk

how could I tell if there is a lift kit installed?

On my 93 Cherokee it had 31x10.5-15 tires on it, I was told that couldnt be done with a stock suspension, so how can I...

2 comments posted 19yrs

posted by abuse

2 comments posted 19yrs posted by abuse

Lugnut removal update

Hey guys, I never could find that lugnut removal socket at any of the auto parts stores around here, so I finally gave...

8 comments posted 19yrs

posted by greg.mergner

8 comments posted 19yrs posted by greg.mergner

'92 Cherokee Routine Maintainence becomes Major Overhaul???

I'm the proud owner of a New (to me) 1992 Jeep Cherokee 2x4 4.0L Laredo. I've been trying to get it cleaned up. The pre...

4 comments posted 19yrs

posted by wfpearson

4 comments posted 19yrs posted by wfpearson

258 stalls at idle

Me again. My 1988 4.2 YJ is once again giving me problems. Just installed a rebuilt 2bl Carter 2 weeks ago. Flushed the...

7 comments posted 19yrs

posted by mgoodenbour

7 comments posted 19yrs posted by mgoodenbour

53 Willys needs 4.27 Ring and pinion

I have purchased a 1953 Willys. I has stock 5.38 rin and pinion and goes about 55 mph max. I've been looking for a set...

2 comments posted 19yrs

posted by cestanley

2 comments posted 19yrs posted by cestanley

95 Yj threaded hole sizes

The threaded holes in my 95 Yj frame are quite rusted so it is hard to tell if the bolt is wrong or if the rust is caus...

6 comments posted 19yrs

posted by neale_rs

6 comments posted 19yrs posted by neale_rs

Can I swap a 2000 XJ Rear Axle into a 1997 XJ

Hi any help will be greatly appreciated. I have a 1997 Cherokee 5spd XJ and I have the rear end from a 2000 Cherokee XJ...

1 comments posted 19yrs

posted by mikeli89

1 comments posted 19yrs posted by mikeli89

'02 Cherokee Overdrive reinstall problem

Good evening, everyone! I was asked ny a friend to reinstall his overdrive unit in his Cherokee this weekend. He was re...

3 comments posted 19yrs

posted by proddy

3 comments posted 19yrs posted by proddy