Having had the lid off the 200TDi we recovered from the Disco, it has some moderate grooving in cylinder 2 and 3 - probably broken rings.
Any rough ideas on rebore prices ? I assume it'll need new pistons, but will they rebore only two pots or do you have to do them all ?
Steve
You do the lot.
I have just rebuilt my 300Tdi with resleeved block and new pistons and most other things.
Cost: R26 770.00 incl labour but this is in South Africa. I think the ZAR:UKP is about 11:1 at the mo.
Regards Stephen
60 quid for a rebore, 25 quid for a head skim, 75 quid for a crankshaft regrind
250 quid EACH for "genuine landrover pistons" or 48 quid....
Has anyone any accurate weights for the 200Tdi engine ? Its not in the Haynes manual !
Steve
around 350 kilos for a 200Tdi complete engine and radiator assembly mounted on a pallete
Take care Pantelis
Pantelis Giamarellos wrote: > around 350 kilos for a 200Tdi complete engine and radiator assembly mounted
Thanks for that Pantelis, I don't need to worry about the rad, it won't be on the stand during the rebuild.
Steve
Have something to add? Share your thoughts — no account required.
Ask the community — no account required