Ping: Lee_D

Dunno if it's the same kit then, but it can be done... just no certain.

I had to get a cable adapter for the computer to allow video in (BMW Kit - flea bay £29). Then there was one pin that needs to be earthed via a relay to put the cam image on the screen (cost one thin wire bodged in the plug). My cam has to be NTSC standard for reverse but the other AV in can be NTC or PAL but can't be used in motion IYSWIM. The camera was something stupid like

1p and £13.00 postage from Hong Kong. No bracket but I cobbled one up meself with an old bit of 101 I had laying around. Other than being a reversed image it's nowt special :-)

As I say I think yours is different in so much as the plug used (may not be required) and I haven't a clue if yours will accept a PAL reverse camera also save faffing with NTSC

The place to check is

It'll no doubt be burried in previous posts - few bodgers on there mind as most just tend to throw money at someone else to do stuff.... I like to think of my self as a pioneer of the poorer folk ;-) (relatively speaking in that forum at least!) Lee D