WTB: Gearbox - Almost any Condition

I've got one which is ok but missing reverse, that's all. I'll check the numbers on it in the morning and report back. It came out of an early 110" if that's any help.

Martin

Thanks for the offer, but it really has to be a 56A Suff. G - I know I'm being Mr. Picky, but I believe these are the strongest versions, with the bigger layshaft bearings which last better with a 200Tdi.

Missing reverse isn't a problem!

Cheers Richard

Where are the numbers? It's possible I may have a suitable unit.

It's on the left hand side, near the botton, on a machines flat bit.

Richard

Fairy nuff, but it came out of a 110" so it might be? Anyway, I forgot what day it was so it'll be monday when I have a look.

Martin

Sorry for the delay but it's 50A 0163474 D, not what you wanted unless you know what this is.

Martin

Thanks for trying - that's the pre-Tdi box with 27mm layshaft bearings so not what I'm after. :-(

Cheers Richard

"beamendsltd" wrote:-

I wasn't aware of the difference (you learn something every day, so they say). I've got a spare box for my RRC Tdi but I suppose this wouldn't be the same as the last time I wanted a short shaft box I had to change both the input shaft and layshaft as the teeth on the gears were different, but I need to keep this anyway for a spare. Have you tried Dave Beaumont near Halifax if it's just a case you want?, I'm sure he would oblige quite cheaply.

Martin