Here,s one for all sparks and Vauxhall owners, or anyone who may know. Any thoughts as to why ALL electric windows and mirrors would not work on a J-Plate Cavalier 1800 CD. Multi plug connectors to drivers door looks O.K.Fuses O.K. Connection to switch pack O.K.Everything else works fine. No accident damage, And no water ingress. Many Thanks in advance. As i think I,ve been barking up the wong tree so far. Jay.
E/Windows
Oct 30, 2003
3 Replies
Remove lift-up cover under hand brake lever to access multi-plug for electric window switch. Test for +12v permanent live on red wire, and +12v ignition feed on black wire. If you have both of these, then it is likely that the switch pack is faulty (do you get the yellow LEDs lighting up in the switches?). If no supply, then suspect broken wire/connector or blown/missing fuse.
To test mirror switch, remove drivers door panel, then check for +12v ignition feed on black wire to switch.
The only thing that links the two systems supply wise is the ignition supply. Not sure if they are on the same fuse or not. On the diagram on the inside of the fuse box lid, look for sections marked KL.15. There should two or three of them, and a fuse in each one.
HTH
Anthony Remove eight from email to reply.
Top notch advice i,ll get my multi-meter out. Many thanks J.
Join the Discussion
Have something to add? Share your thoughts — no account required.
Didn't find your answer?
Ask the community — no account required