conversion problems

Apr 11, 2005 3 Replies

i have a 93 eagle talon, it had a 1.8 auto i recently acuierd a 92 2.0 turbo manual i have everything installed that i need wireing harness intercooler ecm etc...etc....one plug under the dash was different auto was bigger than stick and there were a lot less wires on the harness for the



2.0 well i went through and changed the different plug mtching the same coler of wire with the other so that it would fit into the plug got every thing done went to start it i get spark getting fuel to the rail but none of my injectors are working tought that it was in my wiering but i double checked and its good my fuel relay is good and working does any one know what could be causing my problems

Did you get the quad 10W resistor block (in alloy frame on the firewall near the wiper motor) that turbo injectors are powered through? Non-turbos don't have these, and power the injectors directly from +12V.

Stewart DIBBS

formatting link

ebay, dsm.org, maybe someone in this NG, wrecker. Ask you local Chrysler dealer for the part number of the assembly, then go to the nearest Mitsubishi dealer and order the same part for 60% of the Chrysler price.

Stewart DIBBS

formatting link

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required