Does anyone have any information on a guage solution for a mirage? I need something that will look good, like it belongs. I have some old talon stuff that i took off of my wrecked eagle talon but the a pillar assembly does not match up and the guage cluster ring won't fit as well. Any web site or suggestions would be appreciated...
Mirage guage solutions
Dec 19, 2004
4 Replies
Is possible to remanufacture a 1G Talon gauge cluster to fit a 4G Mirage / Colt / Summit. It would be possible to do a similar job to a 5G Mirage as well. Wiring harness mods/additions are required, but it does look like its meant to be there. Just about anything can be done if you are handy enough, or are prepared to pay someone to do it.
See
formatting link
for some pictures.
Stewart DIBBS
Just what "type" of solution do you need? What year Mirage do you have?
I have a 94 mirage with a 1.5l motor. Some of the things I have available are from my old 96 totalled talon, Autometer guages etc. I am looking for an a-pillar type seutp or something that can fit below the stereo, in the single din space. The guages I am looking for are oil temp and pressure then maybe voltage or water temp...
Stew, I have seen your site and the guage stuff you have would be awesome. However, for this application (basically a commuter car) I would not want to replace the dash cluster. Although it would be nice to have a tach. I only need oil pressure, oil temp and maybe water temp., the stock water temp does not seem accurate. What I was looking for was ideas on where to place the guages.
Join the Discussion
Have something to add? Share your thoughts — no account required.
Didn't find your answer?
Ask the community — no account required