Can anyone help i have a 51 plate expert hdi 2.0 had it on the diagnostics machine its says fuel rail presure sensor too high i have pulled the spill of pipe from one of the injectors and fuel is coming out at high presure telling me it is over fueling does anyone know what would cause this. This is causeing the vehicle to only rev to around 2000 rpm i asume the ecu is puting it into safe mode :(
expert hdi fuel rail presure too high
Dec 27, 2006
2 Replies
if you have a good garage near you they should be able to help you .if they know what they are doing.or ring watson deisels.on tel
02088793584,they are very helpfull.As far as i know:
Fuel pressure is regulated by a control valve which is operated by the ECU using info from the pressure sensor. The control valve is an integrated part of the fuel pump and cannot be separated.
The valve is electromagentically operated by the ECU so maybe a faulty wiring or the pressure sensor is giving wrong readings
"stuart" wrote
Join the Discussion
Have something to add? Share your thoughts — no account required.
Didn't find your answer?
Ask the community — no account required