I'm trying to replace the headlamp and im sure its very simple but i just can't see how to take the old lamp out. I've popped the casing out by pushing the wires back but that's as far as i've managed to get. Can anyone help me out!
Thanks
The lamp is held in with a wire clip normally. Release the wire clip from the two catches and then it should swing out.
Thanks for the reply, i managed to get the lamp to swing out but i wasnt sure how to get the actual bulb out, does it have anything to do with the rubber at the back??
If you are talking about a rubber cup then the bulb is behind that, just unplug the connector, remove the rubber cup and then you will get to the bulb.
I thought it was, but it was very difficult to get the cup off so i wasnt sure and i didnt want to break it. I will try that and let you know how i get on, thank you for your help
"pinksnowball via CarKB.com" wrote in news:6977ff317772a@uwe:
The rubber cup can be a pain to get on and off, unless you have very small hands.
Well you would never guess it but i finally managed to replace it, thank you for all your help. I'm sure I will be on here in the future for more advice lol
MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.