94 Grand Am alignment specs

Hi - I just put new tie rod ends on a 94 Grand Am (4 cyl engine) - and wanted to check the toe-in. Is there a web site I can get the specs from? I'm sure it's pretty close, but would like to check. Thanks - Brian

Reply to
Brian Morgan
Loading thread data ...

Your in luck, I posted the specs for a 95 back in december and found it in google. Might be the same as a 94 so here they are again

Front caster: 1.45 +/- 1 Deg. camber: 0 +/- 1 Deg. Toe-In: 0 +/- 0.12" or 0 +/- 0.24 Deg. Incl Angle: 13.2 Deg.

Rear Camber: -0.40 +/- .75 Deg. Toe-in: 0.10 +/- 0.15" or 0.20 +/-0.30 Deg

Reply to
Bon·ne·ville

MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.