Turbo Six Swapped into a 1968 Nova

Nov 19, 2026 Last reply: 48 seconds ago 4 Replies
Jump to replies (4)

When this thing is on boost, it is a serious machine. The blue 1968 Chevy II Nova carries a turbocharged Toyota 2JZ inline-six, and a dyno run put it at 862.3 power and 794.8 torque. It runs over 860 horsepower at peak boost of around 30 psi, and even on wastegate pressure alone it makes more than 600. Those are proper numbers for a sixties chassis.



The transformation is well documented. The car started out with its original 427-cubic-inch V8, then went through a bare chassis stage where temporary wooden mockup wheels were fitted, and the engine assembly block was photographed along the way. Behind the six sits a Tick Performance-built T56 Magnum manual, and out back there is a Ford 9-inch style rear end with a Moser housing and an Eaton Truetrac differential.



Plenty of details stand out. The cam covers are blue and badged 3000 VVT-i, fed by an HPT turbocharger and a GReddy fuel rail, with a Radium Engineering fuel cell system mounted in the trunk. Stopping comes from Baer multi-piston brakes over aftermarket multi-spoke wheels. Inside there is a custom roll cage, Recaro bucket seats with GReddy harnesses, a Renown steering wheel and a Haltech digital display cluster. The whole car weighs 3,508 pounds with a 53/47 front-to-rear balance, and it has been named Supranova, a nod to both American muscle and the import scene.



One trade-off worth noting: the 1960s metal body gives it loud, uninsulated driving characteristics, so this is not a quiet cruiser. It also seems certain to split opinions among purists, though to me mixing an early-2000s Japanese tuner icon with a classic Nova is exactly what could pull younger folks into these hobbies. The maker, who stands 6-foot-8, also says the Nova fits better than smaller chassis would.



Project by MotorTrend Channel. Watch it on their YouTube channel:

formatting link


Curious about the output curve here. How much does the car make before the boost really comes in, and what is it doing at full boost? Those are big numbers for a swap like this and I would love to know where the wastegate spring sits in the picture.

The choice of a Ford 9-inch style rear end with a Moser housing and an Eaton Truetrac differential looks like a smart one to me. With a turbocharged 2JZ and a manual box behind it, that solid rear setup seems like it can take the hits without drama. The trade-off, in my view, is weight and a bit of old-school behavior compared with an independent setup, but the 53/47 balance suggests it still works fine.

Since the 1960s metal body leaves the cabin loud and uninsulated, I would suggest adding some sound deadening and insulation while keeping the rest of the interior as is. It would not change the character of the car, but it would make longer drives in a 3,508 pound machine with 860-plus horsepower a lot more comfortable. The Recaro seats and Haltech display deserve a quieter space around them.

The maker has shared those figures. On wastegate pressure alone the car makes over 600 horsepower, and at peak boost of around 30 psi it makes over 860. The dyno run showed a maximum of 862.3 power and 794.8 torque, so the full boost number is where the real output lives.

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required