Trouble code 26

My '95 SL1 (EFI/OHC) "check engine" light is on. It is reading code 26, which is the quad drive. I have tested the EVAP canister purge sensor, it reads good (42 ohms); the coolant fan relay, it reads good (80 ohms) and the A/C relay also reads good (82 ohms). I could not check the EGR solenoid ( I dont know where it is located), but I believe if it was not good I would have a code 32 along with code 26. but I have code 26 only. Does anyone know what else could be wrong with my vehicle?

Thanks in advance.

Reply to
lindner
Loading thread data ...

You've ruled out the relays, so it's either the EGR valve or the canister purge solenoid.

The EGR solenoid is on top and the canister purge solenoid is on the back of the engine. My gut feeling is that you may as well just replace both.

Tim.

Reply to
shoppa

MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.