Update on my experiences with my WRX STi '04.

May 18, 2005 5 Replies

Greetings all. I thought I'd share my ongoing experiences with my STi which I traded my old WRX in for last mm.. September (2004) I believe.



For the winter I purchased a set of Pirelli PZero Nero tires and put them on the stock rims. They were great, fantastic tires, but there were two annoying things about them.



First, the sidewalls were mushy. Really mushy by comparison to the OEM tire. Driving over bumps was smooth, and they took corners *almost* better than the OEMs, and ate up snow and mud without even a chirp, but then travelling along at decent speeds made me feel a bit like I was at the top of a jack-in-the-box. It was nowhere near the kind of rock-hard, glued-to-the-road feeling the OEM tires gave me on sunny dry pavement.



Second, either as a result of the soft sidewall or the tread design on the tire (which itself was pretty unique,) I experienced some torque on the steering wheel during acceleration. A wheel alignment *mostly* cured it, but I was left with the feeling that the alignment wasn't straight but slightly off in order to compensate for the tires, as when I braked particularly hard, it felt like it was pulling *slightly* to one side.



Well, it's heading towards summer and the temperatures have warmed back up to an average that I feel comfortable putting the OEMs back on the car. Might as well use em up, right?



So, I went out a bought some nice rims--Rota Torque's, Hyper-Silver, 17x8 for future wider tires, and put the original tires on those, storing the BBS wheels with the Pirellis in a safe place until the weather gets cold again. The Rotas are approximately 3-4 lbs heavier than the BBS wheels each, which I imagine would affect braking ability very slightly with the greater inertia of the spinning wheels, but I refuse to pay $1200/wheel for advanced alloys just to save 2-6 lbs per wheel, especially since I've lost that much weight and more just myself. But more about personal triumphs later. :)



Anyway, the new wheels with the old tires are BEAUTIFUL. The difference is palpable. I'm back to being glued to the road, and to hell with the massive increase in road noise. Even the tramlining isn't nearly as bad as I remember it. It's as though the Pirellis were trainer tires that I could roughouse around on until I was ready to come back to the macho Potenzas.



Plus, I have almost NO torque steer under acceleration, and that's even without a follow-up alignment for the new wheels--something I'll get to sooner rather than later. For some reason I find shifting a lot easier now too, but that could just be because I learned to shift the STi under the original wheels to begin with so I'm more used to the original road noise. That or I'm just better shifting the STi, period.



The downside: other little niggling things are bothering me a little on the STi now.



For example, the daytime running lights. The reality is that these lights are almost as bright as the normal nightlights. Since you can see so well with the daytime running lights when you're in the dark, it's hard to remember you're on your daytimes and that your rear lights aren't lit..! Argh! It should be: either the lights are on, or they're off. There are three bloody settings for the lights on the lever: "Off/Daytime/Full". Unfortunately "Off" is the same as "Daytime" unless you notch up the E-brake or modify the wiring.



Second, the windshield wipers appear to be custom: the little wind deflector attached to the driver's side wiper actually requires an additional little piece to screw it on to. I don't know anyone locally outside the dealership that sells compatible blades. Oh well, I'll live.



Third, I recently realised I never received the service booklet for the car when I bought it. (DOH!) So I have to get them to get me a new one next service run.



Everything else is as when I bought it: Gas mileage is notable in that I average about 350 KM per fill-up of about 45 litres. That's about 21 mpg in the city, or 12.85 litres per 100 KM. Not the horrible 18 mpg listed in the literature at all and certainly nowhere near what I was getting when I first bought the car. I guess after a time I either figured out how to take it easy (while still booting around and sprinting with people at the stoplights) or there's a mix of highway driving in there boosting it a bit.



Performance is still spectacular. I don't drag-race my STi, although on occasion I'll pop up next to a superbike who'll give me a thumbs up and want to see what it can do. I feel guilty somehow when I don't squeal the tires and do a hard launch--like I'm disappointing the other people on the road who recognise the car. It's a terrible dilemma: drag race the car, or baby it. Arg the pressure!



Still, curvy roads are more fun than a sack of angry monkeys. I have to learn to heel'n'toe much better than I can right now. I'm constantly spotting places where the abilty to keep pressure on the brakes while rev-matching a downshift would be tremendously helpful.



Now the cool part. Owning an STi has had one remarkable consequence: I'm losing weight. Lots of it. Not to say I was horribly obese before I bought the STi, but I was definitely chunky. I'm losing it all and getting skinny again. My motivation? Weight savings for the car. What a bizarre thing that's finally encouraged me to portion control and eat healthier foods! But I honestly attribute it all to the car. It's almost like it's encouraged me to be a better person, so I can do it justice when we drive down the road together. Like my computers, the car is a harsh but rewarding master.



Owning an STi has had another unintended consequence. I'm wayyyy too overprotective. If someone is leaning on the car, I can't stand it. If someone slams the door too hard, my teeth jar and I wince. If someone draws their name in the condensation in the windshield I feel like cuffing them in the back of the head (and have to fight to stop from actually doing it.) Anytime someone tells me I'm shifting wrong, I have to roll my eyes and ignore them: they just can't know what it's like to drive the STi. It takes a certain amount of consideration. You can't just shift it and slam the gears around. Well, you can, but it feels wrong to do it. The machine protests and resists your efforts.



Really the only other person who's driven the car in a way that put me completely at ease is a longtime performance car driver friend of mine, whose most recent vehicle was a 2001 BMW M3. Mmm.. the fast M3 kind..



*drool*.

The seats are holding up very well, all mechanisms seem to be functional and in top form, and I've felt no problems with anything else but the alignment. The intercooler spray *still* hasn't run out of its original reservoir of water.



The last thing I wanted to mention was that in experimenting with the DCCD, an odd thing seems to happen at high RPMs. If I leave the car in Auto, it feels like it's shifting much harder and more responsively than if I put it into full rear bias. Perhaps I'm just not hearing the rear wheels break free, but at certain times in a top-acceleration mode, if the DCCD is wide open it feels like it loses power briefly. I'm still investigating this in a "God I hope this isn't hurting the car" mode, so I guess I'll have to learn more about it before saying anything definitive.



All in all, I'm well on the road to breaking the one-year mark. Silver, I'll let you know if I manage to hit it and not trade the car in! I'm pretty stubborn.. but make your bets now.



ttyl!



The weight savings on wheel/tire combos far outweighs deadweight savings. This is unsprung weight that has to follow the contours of the road. Ask any cyclist, moving (rotating) weight savings are worth 4 times frame weight savings. Plus the further from the hub of each wheel the weight is saved also makes a difference.

Yes, I read all that stuff prior to purchasing the Roto Torque's. The money just wasn't worth it: if I had $4800 for a new set of wheels I'd prefer to put the money into a stronger driveshaft, a data logger or onboard terminal, semi-racing brake pads, thicker tires (to go with my new thicker wheels,) *possibly* a suspension upgrade, braided hoses.. the list goes on.

Besides, the weight I've lost pretty much evens out the four-times weight savings, and this way I get wheels I can clean off just by wiping them. The old BBS wheels took 45 minutes of hard scrubbing to get just the visible portions clean. The Rotos are polished, so I can wipe them off, and spray them off normally whenever I'm at the carwash. :)

45 minutes x 2/month * 12 months = 18 hours spent just bloody well scrubbing the damn BBS wheels! :)

Agreed, same in the WRX...I did it tonite for about 5 minutes on a well lit street, before glancing at the dash and realizing.

I've been considering re-assigning the DRL function to the fog lights...partly for that reason (they'll be much more distinguishable from low beams), as well as saving the low beams from DRL duty, which reportedly shortens their life span...I've got Osram Silverstars in there now, so I'd rather they last a while.

Not sure about the HID STi system, but the halogens are basically "powered on" continuously, and controlled by ground switching...DRL inserts a power resistor before ground.

The aspect that makes me hesitant to attempt it is the undefined functions of stuff in there, such as the "combination module" (if that's the right name for it). Subaru definitely has a unique approach in electrical stuff, and as much as I'd like to try it, hate the idea of losing smoke out of anything.

You'll have to keep us informed. I'm always interested in solutions that other people implement.

My STi is a Canadian model, so our headlights are normal ones (although the brights are the brightest I've ever seen) and (thank god) not the HID type.

You'll have to find a copy of the full, updated service manual and see if there is enough data in there for you to figure out what's going on. If I'm not mistaken, for about $25 or so you can get access to Subaru technical publications for download over a span of a few days. Forget where though. The full manuals are in PDF form from there.

thanks for the note!

Yep, I got it...there's a tendency with auto makers to incorporate a semi-pictorial/quasi mechanical layout aspect to their electronic schematics, while simultaneously leaving out bits and pieces of circuits (that are, in reality, connected to things IN the diagram)...Subaru is guilty of this.

The module that I referred to previously--correct name is "integrated module"; he seems to have his fingers in a lot of pies, and tracking them all down has been difficult!

BTW, the stock wiring service for our (since you're non-HID) is 18 or possibly as light as 20 gauge...really skimpy stuff. I installed a set of Hella FF50 driving lights, and tho they're 55 watts, like low beams, they are much brighter than the low beams: they're running off a relay, with 12 gauge service all the way thru. Re- wiring the low beams with end-to-end 12 gauge service, would be the other half of the DRL reassignment.

If you'd like to try OSRAM (not the blue tint Sylvania) Silverstars, they're available on ebay...IIRC, I got them from seller pdburg...the set actually cost less than buying Sylvania SS in local store!

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required