96 honda accord seats

"noi" wrote in news: snipped-for-privacy@e3g2000cwe.googlegroups.com:

Not a dumb question. I've seen way too many rear seats wrecked because some moronic grease monkey didn't know how the seat cushion came out.

See here:

Note the first page is for the fold-down type, and the second is for the non-folding type.

The most important thing to remember is that the seat BACKS must come off FIRST. Once you've done that, the bolt at the rear of the cushion must be removed. The cushion itself then pivots up and forwards, until the front hooks disengage from their holes.

DO NOT attempt to just yank the front hooks out of their holes! This will bend the wire and possibly tear the foam!!!!

"TeGGeR®" wrote in news:Xns984F5840796E1tegger@207.14.116.130:

Oops! I just noticed this is the wrong year for your car! Try here:

This may be closer to your '96. I don't actually have the pages for '96. The basic procedure should be the same though.