Any ideas on how to prevent alum tire rims from corroding on to the wheel hub?*****************Thank you To reply to this email please remove the AT after the kcgillmo in the reply to address as shown above.

How to keep alum rims from sticking?

Nov 06, 2003 7 Replies

Rate this thread:

KG 22 years ago

Any ideas on how to prevent alum tire rims from corroding on to the wheel hub?

***************** Thank you snipped-for-privacy@alpha.delta.edu

To reply to this email please remove the AT after the kcgillmo in the reply to address as shown above.

Vote

David J and Lynne J Shepherd 22 years ago

Vote

Anthony Giorgianni 22 years ago

Yes, anti-seize compound works great for this. Just don't get it all over everything :o)

Vote

Rich 22 years ago

Brush on some anti seize. Use on the mating surface between the rim and hub.

Vote

Mike Romain 22 years ago

I use anti-seize compound. The silver stuff from Permatex. It works great.

Mike

86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's

KG wrote:

Vote

Corey872 22 years ago

Apply a thin layer of anti-seize compound to the joining parts.

Corey

Vote

Clem 22 years ago

Ok, what the hell.... Why not....

Hey! Use some anti-seize compound!

Vote

Anthony Giorgianni 22 years ago

Well, now I get to go to bed laughing. Thanks Clem!

Vote

Have something to add? Share your thoughts — no account required.

Ask the community — no account required