Putting together a 7MGE Toyota engine, one side of the upper thrust washers keeps falling out when it gets nudged by the crank. Whats something that will keep it in place? I thought about a couple of small pieces of tape but don't like the idea of putting anything that will eventually become debris inside the engine.
Thanks.
I hope you have some grease or assembly lube around.... You really don't want to put it together dry.... A dab of that will hold it in place.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's - Gone to the rust pile... Canadian Off Road Trips Photos: Non members can still view! Jan/06
Hopefully, you have measured thrust clearance before putting it back together with a dab of grease to hold the thrust washer in place.
MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.