1. Home
  2. General Toyota Forum
  3. 2004 Sienna OBD II problem

2004 Sienna OBD II problem

I recently bought an Actron CP9125 code scanner to work with my 2 cars including my 2004 Sienna. The scanner works on one car, but not on the Sienna. The only response I get is "no link". I tried it on a friends '04 Sienna and got the same result so I doubt the trouble is with my car. Since the scanner works on one car (a Ford) and not on either of

2 Siennas I'm thinking the scanner has trouble talking to this particular model. Has anyone had success using this scanner on an '04 Sienna?
Reply to
brooksby
Loading thread data ...

The whole purpose of the OBD II standard was to make code readers and scan tools universal for all vehicles. When you plug the code reader into the test port under the dashboard, make sure the ignition is off and the plug is pushed in all the way. Some plugs feel like they are connected when they are actually not pushed in all the way. After the reader is properly plugged in, turn the ignition key to the on position (not accessory) without starting the engine.

Reply to
Ray O

Suggest going to the vendors website at the link below, they have a statement about getting the error code. Or drop them an email/call.

formatting link

Reply to
toyomoho

MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.