Here's the issue with Hazards; I don't have any, with the ignition switch off I pull the Hazard switch and nothing. With the Ignition switch on the Hazard switch light will flash. Nothing blinks front or back. Turn signals work like they should. I tried another 9 prong box and it flashed rapidly, made a strange noise and eventually the turn signal light would stay on until I turned it off with the indicator switch. When I pull the Hazard switch with that one it would do the same as the turn signals; blink rapidly, go solid and make noise. Ok bad 9 prong.
With this one everything functions but the Hazards. Is it possible for just the Hazard function of the 9 prong to fail and the rest not? If so is there a work around so I can the 9 prong in place for the turn signals and get flashers to work or should I just use one of Matt's solutions in Type2.com?
Dave