If you slowly turn in the Volume Control Screw until it bottoms lightly. Then back it out 2-1/2 to 3 turns this gives a starting point.
What is the starting point for the Bypass Screw after a pict 34 rebuild?
If you slowly turn in the Volume Control Screw until it bottoms lightly. Then back it out 2-1/2 to 3 turns this gives a starting point.
What is the starting point for the Bypass Screw after a pict 34 rebuild?
Give it 3 turns out and fire it up.
Chris
"Hal" wrote in news:1145421580.893385.10460 @t31g2000cwb.googlegroups.com:
Thanks
That will get it started, then use that screw to adjust the idle to approx. 900RPM. Then you can adjust the volume screw to set the mixture. Readjust the bypass screw again to approx 900RPM and you're done.
MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.