During a check of the emissions system on this B23F Jetronic II, I noticed that the connector for the AMM had been taken apart and electrical taped back together. Oddly enough the ground wire was very loose and the engine ran much better with it disconnected. Now I am curious to see if the connector is wired properly. Does anybody have the pinout for the AMM connector for this vehicle? I would like to check all of the connections and see if the AMM is working properly. jd
1984 245 pinouts for AMM
Aug 21, 2005
3 Replies
According to the Bentley 240 manual, I think this should be what you need (I checked it three times):
Wire Color Terminal # on AMM _________________________________ WHITE - 8 ORANGE - 9 GREEN/TELLOW - 6 BLACK - 36 WHITE/RED(?) - 7 YELLOW - 12
__ __ Randy & \ \/ /alerie's \__/olvos '90 245 Estate - '93 965 Estate "Shelby" & "Kate"
Thanks, this is exactly what I need, I will let you know how it works out. jd
Go to a junkyard and snip the connector off a car there with a few inches of wire, then splice it in matching the colors, that should be an improvement over the taped together connector.
Join the Discussion
Have something to add? Share your thoughts — no account required.
Didn't find your answer?
Ask the community — no account required