98 Jetta Gl: Oil Change.

Sep 01, 2006 4 Replies

As the 3rd owner of this 98 Jetta GL, I've now feel as if I have been thru a hazing of sorts for having changed the oil myself. The previous owner, appears not to have changed the oil in 20,000 miles. Its a wonder that nasty things did not happen to Jetta during this time. Anyway, I was very very PO'd at the fact that my big hands couldn¹t get a grip on the filter and spin it off. Why? All the freaking obstacles in the way like A/C lines from the compressor, the front frame components. Ultimately, I purchased a filter appliance that fits on the bottom of the filter and you employ a



3/8'ths ratchet or break over bar to twist it loose. Even then, it took some contortioning to get the ratchet into the filter wrench and make it spin to the point where hands could do the rest. Let me guess. VW makes a filter wrench for this purpose right?

Terrence



Prolly, but what I use is a band wrench with a flex joint in the handle. The business end slips over the filter, and the joint lets the handle bend enough to clear the frame, oil pan, etc, etc. Don't remember where I got it, but it was probably an AutoZone, Pep Boys, NAPA, etc, etc.

Mark '95 Jetta GLS

I tried laying down and work on spinning the filter off from the bottom, but again I was foiled by ground clearance issues. After struggling a bit with being a contortionist, I dealt with spinning the old filter off and reinstalling the new one from the top. Seems like a band type of filter wrench that accepts a 12" extension and a 3/8'ths ratchet would have made life easier.

Terrence

The bottom is way easier. The car should be up high enough to work on. Rhino ramps are okay but you can ramp up the ramps to get more height.

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required