1996 Explorer - How to fix Blender Door

96 Exp door that blends cool/warm air to achieve temperature set only works to cool when set to 60 degrees, as soon as you try to go up with the temp
the door swing wide open and you get all hoot air. In winter it is at max heat (90 degrees) no matter what temp you set, any suggestion on fixing without replacing $1400 heater unit the dealer suggests? Thanks for any help...
Add pictures here
<% if( /^image/.test(type) ){ %>
<% } %>
<%-name%>
Add image file
Upload

If the door is operated by a cable, and not a vacuum motor, the cable can be adjusted at he blend door. On older Fords it's done by opening the door wide, then adjusting the position of the clip on the cable.
max-income
--
Every day is a good day- it's just that some are better than others.

Add pictures here
<% if( /^image/.test(type) ){ %>
<% } %>
<%-name%>
Add image file
Upload
go to this site for a fix http://www.ford-trucks.com/forums/forumdisplay.php?s 5c13a79fa3f4c9a714a d51315d81b0&forumid2
Add pictures here
<% if( /^image/.test(type) ){ %>
<% } %>
<%-name%>
Add image file
Upload
after you get to the site select "forums", then scroll down to Explorer
Add pictures here
<% if( /^image/.test(type) ){ %>
<% } %>
<%-name%>
Add image file
Upload

Motorsforum.com is a website by car enthusiasts for car enthusiasts. It is not affiliated with any of the car or spare part manufacturers or car dealers discussed here. All logos and trade names are the property of their respective owners.