Ford focus diagnostics

ianhopkins wrote:

should have some inbuilt diagnostics on the dashboard
http://www.focushacks.com/?modid=37&ht=Instrument%20Cluster%20Test%20and%20Diagnostic%20Mode
otherwise any cheap obd2 device will be fine Creader IV works fine

ianhopkins wrote:

should have some inbuilt diagnostics on the dashboard
http://www.focushacks.com/?modid=37&ht=Instrument%20Cluster%20Test%20and%20Diagnostic%20Mode
otherwise any cheap obd2 device will be fine Creader IV works fine

I have a been thinking about getting a handheld scanner, as I paid £45 last
month to have a diagnostic scan which showed a failed coil pack. A simple 5
minute job and a cheap-ish part. If I had a scanner I could have read the
code, fixed it replaced it for just the cost of the part. The garage
"needed" my car all day as they didn't know when the mechanic could get to
it as he was "overworked".

The above site is interesting but you can only see fault codes, not clear ?

I'm after a scanner (not a fault code reader) that will let you get in to
all the modules, freeze live data, clear faults, read them etc. Something
pretty handy for the Saturday morning tinkerer :)

I'm having trouble finding one as the diagnostic port on the focus is a bit
difficult to deal with. I found lots of 16 pin scanners like the aucutel
maxiscan m509 but it says 16 pin connector and I think its different on the
focus.

Any advice what kind of scanner for my needs I could get ?

Thanks
apologies for the semi-long winded post.
I have a focus 1.6 ghia 2004 model, but I guess the diagnostic ports is the
same on all of them but best to say.

My local independent garage will do it for free.

MBQ