Chevrolet Trucks

  1. Home
  2. Chevrolet Trucks
6982 Threads Posts
to

Worth reading in Chevrolet Trucks

LOW vacuum

'87 Chevy G20 Van At Idle, I have about 19-20 inches of vacuum...running down the road at 50-60 there is about 9! as so...
6 comments posted 21yrs
posted by shades_1970(at)netins(dot)net
6 comments posted 21yrs posted by shades_1970(at)netins(dot)net

wiper circuit

After doing a visual inspection of my 93 circuit board, I simply cannot see any bad solder joints on any connector or b...
2 comments posted 21yrs
posted by click
2 comments posted 21yrs posted by click

Towing with a GMC Canyon

I have ordered the gear to fit out my 2wd Reg Cab 2.8l I-4 Canyon for towing, and wanted to get some feedback. I will n...
5 comments posted 21yrs
posted by commentator
5 comments posted 21yrs posted by commentator

94 Suburban question

I have a 94 Suburban, 5.7L, 150K miles. Runs great until temp reaches approx. 180. When it gets to temp it starts actin...
1 comments posted 21yrs
posted by djoker
1 comments posted 21yrs posted by djoker

Blazer S-10 Lug Stud Removal

I unfortunately broke my one of the wheel lug studs when putting on my spare tire. Does anybody know if the stud is thr...
5 comments posted 21yrs
posted by UseLinkToEmail
5 comments posted 21yrs posted by UseLinkToEmail

luv truck v8

i am doing to v8 conversion on a 1972 chevy l.u.v. truck. i have brodix track one slant plug heads. and am have a hell...
2 comments posted 21yrs
posted by tierod
2 comments posted 21yrs posted by tierod

Chevy Tahoe Message Board

There is a good message board and website that is designed just for the Chevy Tahoe. You might be able to find out some...
2 comments posted 21yrs
posted by calvinist
2 comments posted 21yrs posted by calvinist

adding aftermarket oil pressure guage...

The oil pressure sending unit on my 89 c1500 is acting up. I want to add an aftermarket mechanical guage one like sunpr...
9 comments posted 21yrs
posted by fitzgerald_s
9 comments posted 21yrs posted by fitzgerald_s

99 silverado Z71 4x4 transfer case problem

Does anybody know if the front driveshaft should spin in 2HI? I have looked at two other silverado Z71s (newer models)...
2 comments posted 21yrs
posted by UseLinkToEmail
2 comments posted 21yrs posted by UseLinkToEmail

Dynomax Headers or alternative?

I want to install a set of Dynomax headers on my 1972 Chevy with a 350. It has a 4 speed Muncie with the linkage connect...
4 comments posted 21yrs
posted by ahamann3
4 comments posted 21yrs posted by ahamann3

'01 Silverado - Door Buzzer

When I was installing my brake controller last year I apparently "bumped" the door buzzer and it hasn't worked since. I...
1 comments posted 21yrs
posted by wkorzen
1 comments posted 21yrs posted by wkorzen

Speakers in 89 Sierra

Anyone know what size the rear speakers are in the post? I'm thinking 4X6? What about the dash speakers? Thanks in advan...
8 comments posted 21yrs
posted by martinzed
8 comments posted 21yrs posted by martinzed

speakers in old suburban

I'm replacing the speakers in an 86 suburban. I've already done the back speakers (easily). I'm now doing the front one...
3 comments posted 21yrs
posted by BlazerFanDan
3 comments posted 21yrs posted by BlazerFanDan